Shop
- Sale!
Six Electrical Engineering courses plus South Carolina Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the South Carolina Board of Engineers and Surveyors.Instructor: Juan Pesante, PESouth Carolina – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the South Carolina Board of Engineers and Surveyors Laws and Rules including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: South Carolina Laws, Rules and Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!Six Electrical Engineering courses plus South Dakota Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the South Dakota Board of Technical Professions.Instructor: Juan Pesante, PE
South Dakota – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the South Dakota Board of Technical Professions Laws and Rules, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: South Dakota Laws, Rules & Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!Three Electrical Engineering courses plus Texas Laws, Rules & Ethics course that will earn 15 PDH guaranteed to be accepted by the Texas Board of Professional Engineers & Land Surveyors.Instructor: Juan Pesante, PE
Texas – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the Texas Board of Professional Engineers Statutes and Rules & Regulations, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
- Sale!Six Electrical Engineering courses plus Utah Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Utah Professional Engineers and Professional Land Surveyors Licensing Board.Instructor: Juan Pesante, PE
Utah – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Utah Professional Engineers and Professional Land Surveyors Licensing Board Laws and Rules, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: Utah Laws, Rules and Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!Six Electrical Engineering courses plus Vermont Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Vermont Board of Professional Engineering.Instructor: Juan Pesante, PE
Vermont – Laws, Rules, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the Vermont Board of Professional Engineering Statutes and Codes, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: Vermont Laws, Rules and Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!
Three Civil Engineering courses plus Virginia Laws, Rules, & Ethics course that will earn 16 PDH guaranteed to be accepted by the Virginia APELSCIDLA Board.Instructor: Raymond Bosek, PEVirginia – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics.
Stress and Strain in Soils: 4 PDH
In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.
Engineering Description of Soils and Rocks: 4 PDH
In this course the student will understand the engineering characteristics of soils and rocks and to how to properly identify and classify to develop a subsurface profile for site evaluations.
Slope Stability in Embankments and Structures: 5 PDH
In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.
- Sale!Three Electrical Engineering courses plus Virginia Laws, Rules, & Ethics course that will earn 16 PDH guaranteed to be accepted by the Virginia APELSCIDLA Board.Instructor: Juan Pesante, PE
Virginia – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Virginia State APELSCIDLA Board Laws and Regulations, including Professional Engineering Ethics.
2023 NEC Significant Code Changes Part 1: 4 PDH
Part 1 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).
2023 NEC Significant Code Changes Part 2: 4 PDH
Part 2 of a three part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2023 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2020 Edition of NFPA 70: National Electrical Code (NEC).
Electrical Safety: 5 PDH
In this course the student will understand the dangers and hazards when working with or near electrical power and approaches to work safely to avoid serious injury.
- Sale!Six Electrical Engineering courses plus West Virginia Codes, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the West Virginia State Board of Registration for Engineers. Instructor: Juan Pesante, PE
West Virginia – Codes, Rules, & Ethics for Professional Engineers: 3 PDH
In this course the student will study the West Virginia State Board of Registration for Engineers Codes and Rules, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: West Virginia Codes, Rules & Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!Six Electrical Engineering courses plus Wyoming Statutes, Regulations & Ethics course that will earn 30 PDH guaranteed to be accepted by the Wyoming Board of Professional Engineers and Professional Land Surveyors.Instructor: Juan Pesante, PE
Wyoming – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Wyoming Board of Professional Engineers and Professional Land Surveyors Statutes & Regulations, including Professional Engineering Ethics.
Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH
In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.
Preview Course: Wyoming Statutes, Regulations and Ethics
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development
Preview Course: Best Practices for O&M of Photovoltaic and Energy Storage Systems - Sale!
Six Mechanical Engineering courses plus Alabama Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Alabama State Board of Licensure for Professional Engineers and Land Surveyors. Instructor: Seth Grablow, PEAlabama – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alabama State Board of Licensure for Professional Engineers and Land Surveyors Laws and Rules, including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Alabama Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Five Electrical Engineering courses plus Alaska Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors.Instructor: Juan Pesante, PE
Alaska – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors Statutes and Regulations including Professional Engineering Ethics.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Electrification-Power System Evolution and Infrastructure Development: 5 PDH
In this course the student will understand Electrification, the shift from non-electric to electric sources of energy at the point of final consumption, and an analysis of the potential impacts of widespread electrification on the evolution of the U.S. electricity system. This course follows the guide: Electrification Futures Study: Scenarios of Power System Evolution and Infrastructure Development for the United States, published by the National Renewable Energy Laboratory.
Preview Course: Alaska Statutes, Regulations and Ethics
Preview Course: Analysis of National Charging infrastructure for Electric Vehicles
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Electrification-Power System Evolution and Infrastructure Development - Sale!Five Mechanical Engineering courses plus Alaska Statutes, Regulations & Ethics course that will earn 24 PDH guaranteed to be accepted by the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors.Instructor: Seth Grablow, PE
Alaska – Statutes, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Alaska State Board of Registration for Architects, Engineers, and Land Surveyors Statutes and Regulations including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Alaska Statutes, Regulations and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Fire Protection Systems
Preview Course: Improving Motor and Drive System Performance
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Six Mechanical Engineering courses plus Arkansas Rules, Regulations & Ethics course that will earn 30 PDH guaranteed to be accepted by the Arkansas State Board of Licensure for Professional Engineers and Professional Land Surveyors. Instructor: Seth Grablow, PE
Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Arkansas Rules, Regulations and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Five Electrical Engineering courses plus Delaware Ethics including DE Laws and Rules for Professional Engineers that will earn 24 PDH guaranteed to be accepted by the Delaware's Professional Engineering Licensing Board. Instructor: Juan Pesante, PE
Delaware – Ethics including DE Laws and Rules for Professional Engineers: 4 PDH
This course satisfies the Delaware continuing education requirement of three (3) professional development hours in engineering ethics, (ref. DAPE Guidelines for Maintaining Continuing Professional Competency (CPC) Sec. E1).In this course the student will study three (3) hours of ethics including one (1) hour of the Delaware Association of Professional Engineers Laws and Rules.Design and Development of Hybrid Power Plants: 4 PDH
In this course the student will understand the hybrid power plant and the necessary design and planning details required to ensure reliable and efficient means for power production.
Compressed Air Energy Storage and Pumped Storage Hydropower Concepts: 4 PDH
In this course the student will understand understand current Compressed Air Energy Storage (CAES) and Pumped Storage Hydropower (PSH) technologies and explore future advances of this technology by examining the feasibility of a variety of different concepts.
Energy Storage Technology Cost and Performance: 4 PDH
In this course the student will understand a variety of different energy storage technologies and explore their advantages and disadvantages with an in-depth cost and performance comparison. This course follows the report: Energy Storage Technology and Cost Characterization Report, published by the U.S. Department of Energy (DOE).
Electrical Storage Guide for Electrical Engineers: 5 PDH
This course provides a thorough overview of current electrical storage technologies including batteries, flywheels, compressed air energy storage (CAES), and pumped storage hydropower (PSH) and is a how-to guide for engineers to aid in the selection, procurement, installation, and/or operation of stationary energy storage systems in today’s electric grid.
Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH
This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.
Preview Course: Delaware Ethics including DE Laws and Rules
Preview Course: Design and Development of Hybrid Power Plants
Preview Course: CAES and PSH Concepts
Preview Course: Energy Storage Technology Cost and Performance
Preview Course: Electrical Storage Guide for Electrical Engineers
Preview Course: Analysis of National Charging infrastructure for Electric Vehicles - Sale!Five Mechanical Engineering courses plus Delaware Ethics including DE Laws and Rules for Professional Engineers that will earn 24 PDH guaranteed to be accepted by the Delaware’s Professional Engineering Licensing Board.Instructor: Seth Grablow, PE
Delaware – Ethics including DE Laws and Rules for Professional Engineers: 4 PDH
This course satisfies the Delaware continuing education requirement of three (3) professional development hours in engineering ethics, (ref. DAPE Guidelines for Maintaining Continuing Professional Competency (CPC) Sec. E1).In this course the student will study three (3) hours of ethics including one (1) hour of the Delaware Association of Professional Engineers Laws and Rules.Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Delaware Ethics including DE Laws and Rules
Preview Course: Accident and Operational Safety Analysis
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Fire Protection Systems
Preview Course: Improving Motor and Drive System Performance
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Four Mechanical Engineering courses plus District of Columbia Regulations & Ethics course that will earn 20 PDH guaranteed to be accepted by the District of Columbia Board of Professional Engineers. Instructor: Seth Grablow, PE
District of Columbia – Regulations and Ethics for Professional Engineers: 3 PDH
In this course the student will study the District of Columbia Board of Professional Engineers Regulations, including Professional Engineering Ethics.
Improving Pumping System Performance: 4 PDH
This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Process Heating System Performance: 4 PDH
This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Steam System Performance: 5 PDH
This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency.
Improving Compressed Air System Performance: 4 PDH
This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
- Sale!Three Mechanical Engineering courses plus Georgia Laws, Rules, & Ethics course that will earn 15 PDH guaranteed to be accepted by the Georgia State Board of Registration for Professional Engineers and Land Surveyors. Instructor: Seth Grablow, PE
Georgia – Laws, Rules and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Georgia State Board of Registration for Professional Engineers and Land Surveyors Statutes & Regulations, including Professional Engineering Ethics.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
- Sale!Six Mechanical Engineering courses plus Idaho Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors. Instructor: Seth Grablow, PE
Idaho – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Idaho Board of Licensure of Professional Engineers and Professional Land Surveyors Laws and Rules including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Idaho Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems - Sale!Six Mechanical Engineering courses plus Illinois Laws, Rules & Ethics course and Sexual Harassment Prevention Training that will earn 30 PDH guaranteed to be accepted by the Illinois Department of Financial and Professional Regulation. Instructor: Seth Grablow, PE
Illinois – Laws, Rules and Ethics for Professional Engineers: 3 PDH
In this course the student will study the State Board of Professional Engineers of the Illinois Department of Financial and Professional Regulation Laws and Rules, including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Fire Protection Systems: 3 PDH
In this course the student will understand fire protection systems and fire protection system operations and will be able to familiarize themselves with the various systems and components including operations and maintenance/ inspection procedures.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Sexual Harassment Prevention Training: 1 PDH
This course satisfies the Illinois continuing education requirement of one (1) professional development hours in sexual harassment prevention training, (ref. 20 ILCS 2105/2105-15.5 & ILAC 68/§ 1130.400).In this course the student will understand what sexual harassment is, who it applies too, governing laws, and the methods for employers to address, correct , and prevent sexual harassment in the workplace.
Preview Course: Illinois Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Fire Protection Systems
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems
Preview Course: Sexual Harassment Prevention Training - Sale!Indiana Approved Provider: CE21800049Six Mechanical Engineering courses plus Indiana Laws, Rules & Ethics course that will earn 30 PDH guaranteed to be accepted by the Indiana State Board of Registration for Professional Engineers. Instructor: Seth Grablow, PE
Indiana – Laws, Rules, and Ethics for Professional Engineers: 3 PDH
In this course the student will study the Indiana State Board of Registration for Professional Engineers Laws and Rules including Professional Engineering Ethics.
Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Boiler Basics-Operation and Maintenance: 5 PDH
In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.
Engineering Human Performance Optimization in the Workplace: 4 PDH
In this course the student will understand the strategic approach for improving performance to reduce human error and manage controls so as to reduce unwanted events and/or mitigate their impact should they occur. The student will learn methods and techniques for catching and reducing errors and locating and eliminating latent organizational weaknesses.
Improving Motor and Drive System Performance: 5 PDH
This course provides a thorough overview of motor and drive systems and their components and presents various methods and opportunities to enhance performance and increase efficiency.
Installation, Maintenance, and Repair of Water and Sewage Systems: 5 PDH
In this course the student will understand a facility’s water and sewage systems and associated common components as well as basic concepts in installing, maintaining, repairing and the operation and maintenance of these systems.
Principles of Hydraulic and Pneumatic Systems: 4 PDH
In this course the student will understand the basics of hydraulics and pneumatics systems, hydraulics and pneumatics system components, and the operation and maintenance of these systems.
Preview Course: Indiana Laws, Rules and Ethics
Preview Course: Accident and Operational Safety Analysis
Preview Course: Boiler Basics-Operation and Maintenance
Preview Course: Engineering Human Performance Optimization in the Workplace
Preview Course: Improving Motor and Drive System Performance
Preview Course: Installation, Maintenance, and Repair of Water and Sewage Systems
Preview Course: Principles of Hydraulic and Pneumatic Systems
