Shop
- Sale!Florida Approved Provider: 0006346Four Civil Engineering courses plus Florida Laws & Rules and Florida Ethics course that will earn 18 CEH(PDH) guaranteed to be accepted by the Florida Board of Professional Engineers. Instructor: Raymond Bosek, PE
Florida Laws & Rules for Professional Engineers: 1 CEH
- Florida Approved Course #0010038
- Approved Course for February 28, 2025 Renewal Deadline
- This course satisfies the one (1) hour laws and rules requirement
In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.Florida Ethics for Professional Engineers: 1 CEH
- Florida Approved Course #0010039
- Approved Course for February 28, 2025 Renewal Deadline
- This course satisfies the one (1) hour ethics requirement
The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.Accident and Operational Safety Analysis: 4 PDH
In this course the student will understand the fundamental concepts of accident dynamics, accident prevention, and accident analysis. The student will learn the theoretical bases of safety management and accident analysis, and the practical application of a Safety Management framework for an organization.
Gravel Road Construction: 4 PDH
It is estimated that over a third of the 4.09 million miles of roadway in the United States are not paved. These are typically unpaved gravel or dirt roads, and they’re mostly located throughout rural areas and communities where the volume of traffic is so low that paving and maintaining a paved road is not economically feasible. In this course the student will understand basic concepts in designing and maintaining gravel surfaced roads and essential tips to ensure lasting performance.
Lessons Learned-Design and Construction of Buildings: 3 PDH
In this course the student will review lessons learned from post building occupancy evaluations to understand common building design and/or construction flaws and review essential tips to correct, avoid and/or mitigate these occurrences.
Residential Structural Design: 5 PDH
In this course the student will understand the basics of residential construction and design, residential structural design concepts and design loads for residential buildings and to gain an understanding of modern design methods and concepts for light-frame homes, apartments, and townhouses.
- In this course the student will understand the essentials of subsurface explorations for roadways with a comprehensive overview including site preparation, sampling methods, types of testing and methods, as well as standard guidelines and recommendations.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss preparing for subsurface explorations
- Explain field reconnaissance and setting-up a exploration program
- Discuss sampling techniques and tools
- Explain various tests in addition to the standard penetration test (SPT)
- Understand guidelines for minimum exploration
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase - This course provides a thorough overview of compressed air systems and their components and presents various methods and opportunities to enhance performance and increase efficiency. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand compressed air systems and their components
- Discuss various industrial uses for compressed air
- Explain tools and methods to analyze systems
- Discuss performance enhancements at the system level
- Discuss performance enhancements at the component level
- Understand the economics of the system and systems management approaches
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz - This course provides a thorough overview of process heating systems and their components and practical guidelines to enhance performance and increase efficiency. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand process heating systems and applications
- Discuss process heating system components and principles
- Explain process heating assessments and common system problems
- Discuss performance enhancements at the system level
- Discuss performance enhancements at the component level
- Understand the economics of improving process heating
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz - This course provides a thorough overview of pumping systems and their components and practical guidelines to enhance performance and increase efficiency. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand pumping systems and pumping applications
- Discuss pumping system components and principles
- Explain pumping assessments and common system problems
- Discuss performance enhancements at the system level
- Discuss performance enhancements at the component level
- Understand the economics of improving pumping systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz - This course provides a thorough overview of steam systems and their components and practical guidelines to enhance performance and increase efficiency. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand steam systems and applications
- Discuss steam system components and principles
- Explain steam system assessments and common system problems
- Discuss performance enhancements at the system level
- Discuss performance enhancements at the component level
- Understand the economics of improving steam systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz - This timed course satisfies Ohio R.C. section 4733.151This course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.Instructor: Raymond Bosek, PEThis course presents the main concepts of infrastructure planning in the public sector including the environmental, social, and institutional assessments and discusses many planning methodologies and approaches. The purpose of this course is to provide practitioners involved in planning public infrastructure projects with guidelines to be considered and applied in the planning process.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe Infrastructure Planning in the Public Sector
- Discuss the Infrastructure Planning Process
- Understand the Detailed Studies required
- Explain Municipality responsibilities
- Describe Financial & Economic Analysis
- Discuss the Aspects of Infrastructure Planning
- Explain Public Involvement as it relates to Infrastructure Planning
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 2 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - This timed course satisfies Ohio R.C. section 4733.151In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.Instructor: Raymond Bosek, PEIn this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand the benefits of internal curing for concrete
- Describe the different methods of application
- Describe mixture design and design parameters
- Discuss the attributes and properties of internal curing
- Discuss benefits and long term results of multiple case studies
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - This timed course satisfies Ohio R.C. section 4733.151Along with pumps and valves, reviewed in separate PDH courses, there are many other components that can be found in an industrial/power generation setting. Knowledge of these systems can be useful to any engineer. This online course provides a brief overview of air compressors, hydraulics, boilers, cooling towers, and other components likely to be installed in an industrial facility.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the general mechanical components of industrial and power generation facilities
- Discuss the various types of air compressors, cooling towers, demineralizers, stem traps, etc.
- Describe the different features and configurations of these components
- Explain the safety hazards associated with these components
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - In this course the student will understand the intricate details of laboratory testing of subsurface soils and rocks in order to obtain values of their engineering properties necessary for design.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Explain common laboratory test methods
- Discuss laboratory testing equipment for soil and rock samples
- Discuss testing procedures
- Explain measured parameters
- Understand common guidelines for testing soils and rocks
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase - This timed course satisfies Ohio R.C. section 4733.151In this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.Instructor: Seth Grablow, PEIn this course the engineer will be introduced to modern heat pumps and their applications. This introductory course will enable the students to understand the basics of the latest heat pump technologies and how to apply to multiple applications.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Basic A/C and Heat Pump cycles
- Residential/commerical Heat pump applications and rating heat pumps
- Overview of Variable Refrigerant Flow (VRF) heat pumps
- Overview of Variable Refrigerant Volume (VRV) heat pumps
- Using modern heat pumps for LEED certifications
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - Sale!This course package satisfies Ohio R.C. section 4733.151(1) 27 hrs (seven courses) of the 30 hrs are timed & tracked, remaining 3 hours (one course) is a correspondence course. (2) 2 hrs of required ethics & lawsSeven Civil Engineering courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Raymond Bosek, PE
Course Package consists of:
- Ohio – Laws, Rules, and Ethics (Ohio Timed): 3 PDH
- Residential Structural Design (Ohio Timed): 5 PDH
- Home Builders Guide to Earthquake Resistant Building Design (Ohio Timed): 5 PDH
- Systems Engineering Fundamentals Part 1 (Ohio Timed): 4 PDH
- Systems Engineering Fundamentals Part 1 (Ohio Timed): 4 PDH
- Prescriptive Method for Structural Insulated Panels (SIPs) in Construction (Ohio Timed): 3 PDH
- Lessons Learned-Design and Construction of Buildings (Ohio Timed): 3 PDH
- Fundamentals of Wood Construction: 3 PDH (Online Correspondence)
Preview Course: Ohio Laws, Rules and Ethics
Preview Course: Residential Structural Design
Preview Course: Home Builders Guide to Earthquake Resistant Building Design
Preview Course: Systems Engineering Fundamentals Part 1
Preview Course: Systems Engineering Fundamentals Part 2
Preview Course: Prescriptive Method for SIPs
Preview Course: Lessons Learned-Design and Construction of Buildings
Preview Course: Fundamentals of Wood ConstructionClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchaseOhio Timed courses require an active internet connection with the student logged in
Each course is broken down into multiple timed lessons. Number of lessons and time vary, reference lesson length.
Upon entering a lesson, a timer will start and will auto-complete the lesson when the specified time has passed. Each lesson must be completed in one sitting; however, the auto-complete feature ensures all progress is saved, timed and tracked. Lessons vary from 5 up to 55 minutes and courses may have from 4 to 15 lessons, reference Preview Course.
The final lesson is the course quiz, passing with a 70% or greater will complete the course and generate a certificate of completion. The quiz can be taken multiple times until passing, to help you pass the quiz, it is open book with access to the entire course while completing the quiz. - Sale!This course package satisfies Ohio R.C. section 4733.151(1) 27 hrs of the 30 hrs are timed & tracked, on-demand webinars remaining 3 hours (one course) is a correspondence course. Includes required 2 hrs of required ethics & lawsTwenty-one On-demand webinar courses courses plus Ohio Laws, Rules, & Ethics course that will earn 30 PDH guaranteed to be accepted by the Ohio State Board of Registration for Professional Engineers & Surveyors Instructor: Raymond Bosek, PE
Course Package consists of:
- Ohio – Laws, Rules, and Ethics for Professional Engineers & Surveyors: 3 PDH (Correspondence)
- 2023 NEC Significant Code Changes Part 1: 1 PDH (Timed Webinar)
- 2023 NEC Significant Code Changes Part 2: 1 PDH (Timed Webinar)
- 2023 NEC Significant Code Changes Part 3: 1 PDH (Timed Webinar)
- 2023 NEC Significant Code Changes Part 4: 1 PDH (Timed Webinar)
- 2023 NEC Significant Code Changes Part 5: 1 PDH (Timed Webinar)
- Administering the Construction Project: 2.5 PDH (Timed Webinar)
- Bases and Subbases for Concrete Pavements: 1 PDH (Timed Webinar)
- Design for Construction Safety: 1 PDH (Timed Webinar)
- Diesel Engine Fundamentals: 1.5PDH (Timed Webinar)
- Emerging Technologies Connected Vehicles: 1PDH (Timed Webinar)
- Engineer’s Guide to Green Building: 1 PDH (Timed Webinar)
- Engineer’s Guide to Green Building-Part 2: 2 PDH (Timed Webinar)
- Engineering Economic Analysis: 2 PDH (Timed Webinar)
- Ethics for the Practicing Engineer: 1PDH (Timed Webinar)
- Fasteners 1.5 PDH (Timed Webinar)
- Infrastructure Planning: 2 PDH (Timed Webinar)
- Internal Curing for Concrete Pavements: 1 PDH (Timed Webinar)
- Introduction to Mechanical Components: 1.5 PDH (Timed Webinar)
- Modern Heat Pumps: 1PDH (Timed Webinar)
- Roller Compacted Concrete Pavements: 1 PDH (Timed Webinar)
- Storm Shelters & Safe Rooms: 1 PDH (Timed Webinar)
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - This timed course satisfies Ohio R.C. section 4733.151This introductory course provides the engineer the basic understanding of the fundamentals of RCCP in design and construction. It presents an overview of the best practices for roller-compacted concrete pavement, its uses, its mixtures and construction.Instructor: Raymond Bosek, PEThis introductory course provides the engineer the basic understanding of the fundamentals of RCCP in design and construction. It presents an overview of the best practices for roller-compacted concrete pavement, its uses, its mixtures and construction.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand materials used for RCC pavements
- Explain Construction and Design of RCCP
- Describe Paving Operations of RCCP
- Discuss Jointing and Texturing of RCCP
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - In this course the student will understand the design of slope stability in embankments and structures and how to recognize, analyze, and solve slope instability issues encountered.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Explain the effects of water on slope stability
- Discuss Factor of Safety in Design
- Understand how to solve slope instability problems
- Explain methods and tools to solve slope instability issues
- Understand methods to improve stability
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase - This timed course satisfies Ohio R.C. section 4733.151This course presents engineers with important information about the design and construction of community and residential safe rooms that will provide protection during tornado and hurricane events. The course will center around design guides FEMA P-320, P-361, and ICC 500.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Discuss Costs and Tolls of Tornado and Hurricane Disasters
- Explain Assessing Risks of Tornado and Hurricane Disasters
- Describe Storm Shelter/Safe Room Designs Guidelines in regards to location, flying debris resistance, flooding, etc.
- Explain Storm Shelter/Safe Room Design Structural Design & Loading
- Discuss FEMA Safe Room Plans
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. - In this course the student will understand sustainability throughout the entire pavement life cycle and the importance of recognizing context sensitivity and assessing trade-offs in developing sustainable solutions.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Explain selection, design, and production of asphalt materials for sustainability
- Discuss sustainable strategies in asphalt pavement design and construction
- Understand sustainable concepts on preservation/maintenance of asphalt pavements
- Explain asphalt pavement end of life sustainable strategies
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase - In this course the student will understand the properties and mechanics of soils and accurately calculate the stresses and deformations of soil masses.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand weight-volume relationships
- Discuss vertical and lateral stress distributions
- Discuss load deformation processes
- Explain strength of soils
- Understand calculating stress and strain
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).
Preview CourseClick “Preview Course” to view prior to purchaseClick “Add to Cart” to purchase - Part one of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Explain systems engineering management
- Understand the systems engineering process
- Discuss requirement and functional analysis and allocation
- Discuss systems engineering and the verification process
- Explain the outputs of the systems engineering process
- Understand work breakdown structure and configuration management
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz - Part two of a two-part course, this course provides a thorough overview of the systems engineering process and presents a in-depth review of the tools and processes to to develop a system efficiently and effectively and to support that system through its life cycle. Instructor: Seth Grablow, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understand technical reviews and their roles in systems development
- Discuss applications of trade studies, modeling & simulation, and metrics
- Explain risk management and standards tools and concepts
- Discuss systems engineering planning
- Discuss product improvement strategies
- Explain organizing and integrating systems development
- Understand contractual and management considerations
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a twenty (20) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz