Shop
Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.Instructor: Raymond Bosek, PEPackage plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
- Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
- Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
- Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
- Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
Part 1 of a multiple part series, this four (4) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to and including article 300. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Juan Pesante, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapters 1 up to and including chapter 3
- Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) professional development hour (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
In this course the student will understand the requirements and best practices for the design, installation and commissioning of cooling tower systems of water cooled air conditioning systems.Instructor: Seth Grablow, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Cooling Tower Types and Systems
- Construction and Installation Requirements
- Installation Locations
- Water and Bleed-Off Water Water Control
- Notices and Labels
- Risk Management
- Testing and Commissioning
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
In this course the student will understand the requirements and best practices for the operation and maintenance of cooling tower systems of water cooled air conditioning systems.Instructor: Seth Grablow, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Operation of Cooling Tower Systems
- Maintenance of Cooling Tower Systems
- Management of Cooling Tower Systems
- Decommissioning of Cooling Tower Systems
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hour (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
In this course the student will understand water-cooled air conditioning systems and the guidelines for cooling tower design, installation, testing, commissioning, operation and maintenance.Instructor: Seth Grablow, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Corrosion Inhibition
- Scale Inhibition
- Bacterial and Microbiological Control
- Water Treatment System Controls and Monitoring
- Occupational Saftey and Health
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies two (2) professional development hours (PDH) of continuing education.
Preview CourseClick “Preview Course” to View Prior to PurchaseClick “Add to Cart” to Purchase and Access Quiz
Part 1 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from the introduction up to and including article 300. The student will be identifying sections, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deletion), the student will review the 2020 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2020 Edition of NFPA 70: National Electrical Code (NEC) from the 2017 Edition from Introduction up to and including chapter 3
- Comprehend, after reviewing the significant changes and additions to the 2020 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 4. The student will be identifying sections, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deletion), the student will review the 2020 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2020 Edition of NFPA 70: National Electrical Code (NEC) from the 2017 Edition for Chapter 4
- Comprehend, after reviewing the significant changes and additions to the 2020 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
Part 3 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 5. The student will be identifying sections, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deletion), the student will review the 2020 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2020 Edition of NFPA 70: National Electrical Code (NEC) from the 2017 Edition for Chapter 5
- Comprehend, after reviewing the significant changes and additions to the 2020 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
Part 4 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapter 6. The student will be identifying sections, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deletion), the student will review the 2020 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2020 Edition of NFPA 70: National Electrical Code (NEC) from the 2017 Edition for Chapter 6
- Comprehend, after reviewing the significant changes and additions to the 2020 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
Part 5 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2020 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2017 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC for chapters 7, 8, and 9. The student will be identifying sections, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deletion), the student will review the 2020 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2020 Edition of NFPA 70: National Electrical Code (NEC) from the 2017 Edition for Chapter 7 through Chapter 9
- Comprehend, after reviewing the significant changes and additions to the 2020 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will deep dive into chapter 4: Accessible Routes of the ADA guidelines covering in detail all regulations and requirements.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the ADA guidelines for design & construction of accessible routes
- Discuss ADA requirements for walking surfaces, doors/gates, & ramps
- Understand ADA requirements for all types of elevators
- Examine and understand all regulations in Chapter 4 of the ADA guidelines
CERTIFICATE OF COMPLETION
This 1.5 hour (90 min) webinar satisfies online live instruction required for Ohio, New York, Wisconsin & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1.5 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar. Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
The Americans with Disabilities Act (ADA) is a federal civil rights law intended to protect qualified persons with disabilities from discrimination. The ADA covers a wide range of legal and regulatory issues with regard to Americans with disabilities. This course will focus on the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (the 2010 ADA Accessibility Design Guidelines): it will cover an overview of ADA, its impact/compliance on new construction and existing facilities and will deep dive into chapter 3: Building Blocks of the ADA guidelines covering in detail all regulations and requirements.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the ADA guidelines and a foundation for navigating them
- Discuss what the ADA is, and all the regulations involved
- Understand the ADA and its impact & compliance
- Examine and understand all regulations in Chapter 3 of the ADA guidelines
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Ohio, New York, Wisconsin & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
In this course we will review the management and administrative procedures that practitioners will need to guide construction projects from the pre-construction phase to project close out successfully. The course will benefit professional engineers serving as project managers or field representatives by presenting techniques that can be applied to the construction project to enhance operations, improve scheduling, mitigate issues, and help minimize and resolve claims or disputes.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the different types of project delivery systems
- Discuss the various responsibilities of each project member
- Discuss necessary documentation and construction laws
- Explain the bidding process and contract award
- Describe planning, scheduling, and operations
- Discuss changes and handling claims and disputes
- Explain project closeouts
CERTIFICATE OF COMPLETION
This 2.5 hour (150 min) webinar satisfies online live instruction required for Ohio, New York, Wisconsin & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies 3 professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PESPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe the best practices for design & construction of bases & subbases
- Discuss the early use and history of bases & subbases
- Understand the pavement layer configuration
- Explain design considerations for bases and subbases
- Discuss design of bases/subbases layers for rigid pavements
- Describe the materials utilized for bases & subbases
- Understand the construction of bases/subbases layers
- Explain cost considerations
- Discuss European practices of design and construction with bases & subbases for rigid pavements
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Ohio, New York, Wisconsin & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
This course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.Instructor: Raymond Bosek, PEThis course will provide engineers with information on how to recognize and anticipate construction hazards and how to eliminate them with well thought out design features. This course emphasizes permanent design features that eliminate or reduce the risk to hazards.
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Identify factors which contribute to construction injuries and fatalities
- Explain how to analyze work sites for hazards
- Discuss the hierarchy of controls for construction hazards
- Provide methodology and examples of how appropriate design features can eliminate or reduce the risk of an injury
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
- Part 2 of a multiple part series, this one (1) hour course covers and highlights some of the significant changes and updates in the 2017 Edition of NFPA 70: National Electrical Code (NEC) which was recently updated from the 2014 Edition of NFPA 70: National Electrical Code (NEC). The student will progress through each section of the NEC from chapter 3 through chapter 4. The student will be identifying chapters, articles, and tables of where and what significant changes occurred (be it an addition, revision, or deleting), the student will review the 2017 version of the updated text, and understand the reason for the change with an explanatory brief.Instructor: Raymond Bosek, PE
SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Become familiar with some of the significant changes including additions, deletions, and modification to the 2017 Edition of NFPA 70: National Electrical Code (NEC) from the 2014 Edition for Chapter 3 up to and including chapter 4
- Comprehend, after reviewing the significant changes and additions to the 2017 Edition of NFPA 70: National Electrical Code (NEC) the large scope of the changes to the code, thereby seeking additional and more thorough reviews of the entire code
CERTIFICATE OF COMPLETION
You will be able to immediately print a certificate of completion after passing a five question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.
Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will have access to launch the On-demand Webinar.
The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.
Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
You may print or save your certificate or access anytime within your account. 
This course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.Instructor: Seth Grablow, PEThis course provides the engineer the basic understanding of the operation and design of Diesel Engines. The student will learn in depth, the diesel engine operation including an overview of all basic components as well as the different cycles and the operation of all essential systems of modern day diesel engines.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Describe Diesel Engine Operation both 2 and 4 stroke
- Discuss the history & background of diesel engines
- Understand the functions of different components and subsystems of a diesel engine
- Describe typical terminology and design features
- Discuss Engine Fuel Control and speed control design operations
- Explain the engine protection system and components
CERTIFICATE OF COMPLETION
This 1.5 hour (90 min) webinar satisfies online live instruction required for Ohio, New York, Wisconsin & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
As this latest technology emerges, the engineer will learn about connected vehicles, the technologies, and the various public and private programs used for development and testing.Instructor: Seth Grablow, PEAs this latest technology emerges, the engineer will learn about connected vehicles, the technologies, and the various public and private programs used for development and testing.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Understanding of what is a Connected Vehicle
- Discuss the US DOT connected vehicle programs and partnerships between public & private entities
- Describe the many technologies and common components
- Explain the various issues of implementing connected vehicles
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required for Wisconsin, Ohio, New York, & Iowa Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.Instructor: Raymond Bosek, PE
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of an in-depth examination of all green materials and methods for building green, and a comprehensive green building checklist to review before, during, and after any green build.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn what means to build “Green” and the many benefits it offers
- Understand a comprehensive list of design & building considerations to be examined during a build
- Discuss the numerous materials & processes which can be applied during a Green building project
- Review a comprehensive green building checklist to easily identify areas to apply Green Building principles
CERTIFICATE OF COMPLETION
This 2 hour (120 min) webinar satisfies online live instruction required Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies two (2) professional development hours (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.Instructor: Raymond Bosek, PE
In this course the student will examine numerous materials and methods to incorporate into a commercial & residential build to make it a green build. This includes understanding of the attributes of green building methods and products and the design and developing considerations for all building & home systems.SPECIFIC KNOWLEDGE OR SKILL OBTAINED
This course teaches the following specific knowledge and skills:
- Learn what means to build “Green” and the many benefits it offers
- Explain the attributes of various materials and building products used for Green building
- Understand a comprehensive list of design & building considerations to be examined during a build
CERTIFICATE OF COMPLETION
This 1 hour (50 min) webinar satisfies online live instruction required Licensed Professional Engineers. Upon completion all attendees will receive a record in a form of a certificate of completion. Records will be emailed to all attendees and available anytime online by accessing your account on EZ-pdh.com. This course satisfies one (1) professional development hour (PDH) of continuing education.
Our webinars are conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).Upon purchase your will be emailed a link to the webinar.Also a link to the webinar will be in your Student Menu, in MyCourses under this course.
Clicking the link you will be redirect to gotowebinar.com where you will be asked to register with your name and email. This step can be performed anytime prior to or immediately before the webinar.
During the webinar you will be viewing live instruction with the ability to ask written questions to the instructor (students will not have open mics, so only chat available). Assessment of student progress will occur as a continuous process throughout the session and can include polling, Q&A sessions, and final questions posed by the instructor.
Within the hour after webinar completion you will receive via email a certificate of completion. Also your online records in MyCourses will show this course completed with a link to the certificate as well. All outstanding questions asked during the webinar will also be answered via email at this time.
