Showing 381–400 of 1449 results

  • Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

     $18.00 Add to cart
    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand residential and non-residential electric vehicle charging requirements
    • Discuss existing vehicle and infrastructure status
    • Understand different scenarios of growth
    • Explain direct current fast charging growth for corridor charging
    • Discuss overall infrastructure changes required for models and estimates

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Analysis of National Charging infrastructure for Electric Vehicles: 3 PDH

     $18.00 Add to cart
    This courses addresses the fundamental question of how much plug-in electric vehicle (PEV) charging infrastructure is needed in the United States to support both plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs). In this course the student will understand PEV charging infrastructure requirements and analyze a range of plausible scenarios that consider the relationship between the evolution of the PEV fleet and charging infrastructure.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand residential and non-residential electric vehicle charging requirements
    • Discuss existing vehicle and infrastructure status
    • Understand different scenarios of growth
    • Explain direct current fast charging growth for corridor charging
    • Discuss overall infrastructure changes required for models and estimates

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Approach Roadway Deformations: 4 PDH

     $24.00 Add to cart
    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Approach Roadway Deformations: 4 PDH

     $24.00 Add to cart
    In this course the student will understand roadway approach embankment design and construction and methods to mitigate deformations typically seen in these structure, including the infamous “bump” encountered at the approach to structure interface.Instructor: Raymond Bosek, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Explain typical approach roadway deformation problems
    • Discuss internal and external deformation
    • Understand computation of immediate and consolidation settlements
    • Explain deformation design solutions
    • Understand construction monitoring and quality assurance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies four (4) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH

    Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH

     $18.00 Add to cart
    In this course the student will study the Arkansas State Board of Lisensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE

    In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Arkansas's rules and regulations
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH

    Arkansas – Rules, Regulations, and Ethics for Professional Engineers: 3 PDH

     $18.00 Add to cart
    In this course the student will study the Arkansas State Board of Lisensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.
    Instructor: Juan Pesante, PE

    In this course the student will study the Arkansas State Board of Licensure for Professional Engineers and Professional Surveyor Rules and Regulations including Professional Engineering Ethics. A Twenty-five question quiz will test his or her understanding of the subject.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • The engineer's guidelines for practicing within Arkansas's rules and regulations
    • The engineer’s duty to protect the public
    • The engineer’s duty to make objective and truthful statements
    • The engineer’s duty to limit practice to his or her field of competence
    • The engineer’s duty to maintain client confidentiality
    • The engineer’s responsibility to the profession

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 25 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

    Preview Course
    Click” Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Bases and Subbases for Concrete Pavements: 1 PDH

     $6.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Rigid Pavement Layer Configuration
    • Design of Base/Subbase For Rigid Pavements
    • Materials For Base and Subbase
    • Construction and Subbase
    • Cost Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Bases and Subbases for Concrete Pavements: 1 PDH

     $6.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.
    Instructor: Raymond Bosek, PE
    In this course the student will understand the concepts and benefits of internal curing for concrete pavements including mixture design, quality control, and studies of practical applications over the past two decades.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Rigid Pavement Layer Configuration
    • Design of Base/Subbase For Rigid Pavements
    • Materials For Base and Subbase
    • Construction and Subbase
    • Cost Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one (1) professional development hour (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Bases and Subbases for Concrete Pavements: 1 PDH (On-Demand Webinar)

     $10.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PE
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the best practices for design & construction of bases & subbases
      • Discuss the early use and history of bases & subbases
      • Understand the pavement layer configuration
      • Explain design considerations for bases and subbases
      • Discuss design of bases/subbases layers for rigid pavements
      • Describe the materials utilized for bases & subbases
      • Understand the construction of bases/subbases layers
      • Explain cost considerations
      • Discuss European practices of design and construction with bases & subbases for rigid pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Bases and Subbases for Concrete Pavements: 1 PDH (On-Demand Webinar)

     $10.00 Add to cart
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.Instructor: Raymond Bosek, PE
    In this course the student will understand the best practices for the design and construction of bases and subbases for concrete pavements as well as the effects on performance.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Describe the best practices for design & construction of bases & subbases
      • Discuss the early use and history of bases & subbases
      • Understand the pavement layer configuration
      • Explain design considerations for bases and subbases
      • Discuss design of bases/subbases layers for rigid pavements
      • Describe the materials utilized for bases & subbases
      • Understand the construction of bases/subbases layers
      • Explain cost considerations
      • Discuss European practices of design and construction with bases & subbases for rigid pavements

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a five (5) question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. Records also are available anytime online by accessing your account on EZ-pdh.com. This course satisfies 1 professional development hours (PDH) of continuing education.

    Our On-demand Webinars are recorded from live webinars conducted utilizing GotoWebinar.com service (chosen for reliability, ease of use, no software required and ability to attend using your computer, tablet, or smart phone).

    Upon purchase your will have access to launch the Ondemand Webinar.

    The On-demand Webinar will play through similar to a live webinar, however you will have the ability to take anytime, pause/rewind and complete in more than one session.

    Upon completion you will then answer a short five question quiz, which can be taken unlimited times until passing, immediately generating a certificate of completion.
    You may print or save your certificate or access anytime within your account.

  • Basic Electrical and DC Theory: 10 PDH

    Basic Electrical and DC Theory: 9 PDH

     $50.00 Add to cart
    Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.
    Instructor: Juan-Pesante, PE

    Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.

    This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • How is DC voltage produced and what does an electric circuit consist of
    • What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
    • What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
    • What is resistivity and how temperature affects the resistance of materials
    • What is the difference between open circuit, close circuit, and short circuit
    • What primary characteristics identify a series, parallel or a combination circuit
    • How to calculate the current and voltage drop in series, parallel or combination circuits
    • How to calculate the equivalent resistance for a series, parallel or combination circuit
    • What is meant by the terms voltage divider and current division
    • How is electron flow theory different from conventional current theory

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Basic Electrical and DC Theory: 10 PDH

    Basic Electrical and DC Theory: 9 PDH

     $50.00 Add to cart
    Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.
    Instructor: Juan-Pesante, PE

    Do you know where electricity comes from? To be able to say yes to that question, you must understand a bit about the physics of matter. In this course you’ll learn the basics involving: matter, electron theory, magnetism, electromagnetism, the laws of electrical circuits, series circuits, parallel circuits, series-parallel circuits and the basic electrical formulas.

    This course also introduces the basic electricity and electrical circuit concepts associated with direct current. Topics include calculation of current, voltage, resistance and power in series, parallel and combination circuits with direct current (DC) power sources.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • How is DC voltage produced and what does an electric circuit consist of
    • What is a rectifier and how half-wave bridge rectifiers differ from full-wave bridge rectifiers
    • What is the difference between a schematic diagram, one-line diagram, block diagram and wiring diagram
    • What is resistivity and how temperature affects the resistance of materials
    • What is the difference between open circuit, close circuit, and short circuit
    • What primary characteristics identify a series, parallel or a combination circuit
    • How to calculate the current and voltage drop in series, parallel or combination circuits
    • How to calculate the equivalent resistance for a series, parallel or combination circuit
    • What is meant by the terms voltage divider and current division
    • How is electron flow theory different from conventional current theory

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 30 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 9 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH

    Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH

     $36.00 Add to cart
    This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.Instructor: Juan Pesante, PE

    This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Battery theory and terminology
    • Battery operations: series, parallel, primary, seconday, shelf life, etc
    • Battery types: wet, dry, alkaline, etc
    • Battery harzards
    • Inductance
    • Capacitance
    • DC generator construction
    • DC generator theory of operation
    • DC generator voltage production, ratings, & losses
    • DC motor theory
    • DC motor construction and operation

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH

    Batteries, DC Circuits, DC Generators, & DC Motors: 6 PDH

     $36.00 Add to cart
    This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.Instructor: Juan Pesante, PE

    This electrical training course provides a basic introduction to DC theory, electrical circuits, batteries and DC machinery (motors and generators). This course is essential to electrical engineers to refresh upon the basics and relearn the basic knowledge of electrical principals and equipment usages and applications.

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Battery theory and terminology
    • Battery operations: series, parallel, primary, seconday, shelf life, etc
    • Battery types: wet, dry, alkaline, etc
    • Battery harzards
    • Inductance
    • Capacitance
    • DC generator construction
    • DC generator theory of operation
    • DC generator voltage production, ratings, & losses
    • DC motor theory
    • DC motor construction and operation

      • CERTIFICATE OF COMPLETION

      You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH

     $30.00 Add to cart
    In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand standards of O&M of Photovoltaic and Energy Storage Systems
    • Discuss prerequisites for a successful O&M program
    • Understand dependencies on PV system type, site, and environmental conditions
    • Explain system performance and O&M plans
    • Discuss system monitoring and O&M implementation strategies
    • Discuss estimating PV O&M costs
    • Understand PV O&M cost survey information and trends

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Best Practices for O&M of Photovoltaic and Energy Storage Systems: 5 PDH

     $30.00 Add to cart
    In this course the student will understand how to reduce the cost and improve the effectiveness of operations and maintenance (O&M) for photovoltaic (PV) systems and combined PV and energy storage systems. The course follows the guide: Best Practices for O&M of Photovoltaic and Energy Storage Systems 3rd edition, published by the National Renewable Energy Laboratory.Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand standards of O&M of Photovoltaic and Energy Storage Systems
    • Discuss prerequisites for a successful O&M program
    • Understand dependencies on PV system type, site, and environmental conditions
    • Explain system performance and O&M plans
    • Discuss system monitoring and O&M implementation strategies
    • Discuss estimating PV O&M costs
    • Understand PV O&M cost survey information and trends

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
  • Blockchain-Technology-Overview-PDH-Engineering-Course

    Blockchain Technology Overview: 3 PDH

     $18.00 Add to cart
    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations. Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the Origins of Blockchains
    • Identify Blockchain Components and Models
    • Explain Blockchain Forking and Contracts
    • Explain Blockchain Smart Contracts
    • Discuss Blockchain Limitations and Misconceptions
    • Discuss Blockchain Applications Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz
  • Blockchain-Technology-Overview-PDH-Engineering-Course

    Blockchain Technology Overview: 3 PDH

     $18.00 Add to cart
    In this course the student will be introduced to Blockchain technology, from its history and beginnings, through the various components, models, and make-up and finally its applications and limitations. Instructor: Juan Pesante, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

    • Understand the Origins of Blockchains
    • Identify Blockchain Components and Models
    • Explain Blockchain Forking and Contracts
    • Explain Blockchain Smart Contracts
    • Discuss Blockchain Limitations and Misconceptions
    • Discuss Blockchain Applications Considerations

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies three (3) professional development hours (PDH) of continuing education.

    Preview Course
    Click “Preview Course” to View Prior to Purchase
    Click “Add to Cart” to Purchase and Access Quiz

  • Boiler Basics-Operation and Maintenance: 5 PDH

     $30.00 Add to cart
    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain steam generation theory
      • Explain boiler design requirements
      • Discuss the different types of boilers
      • Describe the different types of boiler fittings and accessories
      • Identify the automatic controls associated with boilers
      • Describe the different types of instruments and meters
      • Explain the procedures associated with boiler water treatment and cleaning
      • Describe the procedures for cleaning boiler firesides and watersides
      • Describe the procedures associated with boiler maintenance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase

  • Boiler Basics-Operation and Maintenance: 5 PDH

     $30.00 Add to cart
    In this course the student will understand steam generation, boilers and boiler components, and basic concepts in their operation and maintenance.Instructor: Seth Grablow, PE

    SPECIFIC KNOWLEDGE OR SKILL OBTAINED

    This course teaches the following specific knowledge and skills:

      • Explain steam generation theory
      • Explain boiler design requirements
      • Discuss the different types of boilers
      • Describe the different types of boiler fittings and accessories
      • Identify the automatic controls associated with boilers
      • Describe the different types of instruments and meters
      • Explain the procedures associated with boiler water treatment and cleaning
      • Describe the procedures for cleaning boiler firesides and watersides
      • Describe the procedures associated with boiler maintenance

    CERTIFICATE OF COMPLETION

    You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies five (5) hours of professional development (PDH).

    Preview Course
    Click “Preview Course” to view prior to purchase
    Click “Add to Cart” to purchase
Shopping Cart
Scroll to Top