Florida Laws & Rules for Professional Engineers: 1 CEH

Preview Course: Florida Laws and Rules

In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s guidelines for practicing within Florida’s laws and rules
• Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
• Florida Statutes: Changes to Chapter 455
• Florida Statutes: Changes to Chapter 471
• Disciplinary Cases Review

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

Florida Ethics for Professional Engineers: 1 CEH

Preview Course: Florida Ethics

The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

Process Design for Conversion of Biomass to Biofuels: 4 PDH

In this course you the student will understand the motivation, process, design, and cost of converting biomass into biofuel. The focus of this course is to find a plausible pathway to convert algal carbohydrates and lipids to fuel and to minimize cost during production.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Why the motivation to exploit this energy supply
  • Process design and cost estimation
  • Economics and processing cost factors
  • Analysis of processing research on case study
  • Future research and opportunities

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 4 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Engineer’s Guide to Cross Connection Control: 4 PDH

In this online course a student will understand cross connection risks, review real case studies of cross connection mishaps, and understand the various methods and procedures to mitigate cross connection hazards.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the reasons for performing a study
• Understand the health hazards of cross-connections
• Discuss various real-life mishaps
• Discuss cross-connections risk mitigation
• Explain programs for cross-connection control and backflow prevention
• Understand common cross-connection scenarios and methods to mitigate

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Carbon Absorption of Volatile Organic Compounds: 3 PDH

Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • The types of carbon adsorption equipment and which are in most common use
  • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
  • Adsorber sizing parameters
  • Make adsorption and desorption time calculations
  • Procedures for estimating carbon requirements
  • Cost estimation procedures for carbon adsorption systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Corrosion Protection for Metal Fasteners in Coastal Areas: 3 PDH

In this online course a student will understand material design and selection of metal fasteners and connectors on structures in coastal areas for increased corrosion-resistance.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the importance of using corrosion-resistant metal connectors and fasteners in coastal areas
• Discuss regulations and codes in corrosion resistance material selection for fasteners
• Explain the causes of corrosion in coastal areas
• Understand types of corrosion-resistant metal connectors and fasteners
• Explain best practices for corrosion resistance

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Hazardous Waste Identification: 2 PDH

This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Fundamentals of the hazardous waste identification process
  • Definition of hazardous waste & solid waste as used by RCRA
  • How to identify listed hazardous wastes and their characteristics
  • Interpretation of the mixture and ‘derived-from’ rules
  • Interpretation of the contained-in policy

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Florida Laws & Rules for Professional Engineers: 1 CEH

Preview Course: Florida Laws and Rules

In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer's guidelines for practicing within Florida's laws and rules
• Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
• Florida Statutes: Changes to Chapter 455
• Florida Statutes: Changes to Chapter 471
• Disciplinary Cases Review

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

Florida Ethics for Professional Engineers: 1 CEH

Preview Course: Florida Ethics

The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

Building Envelope Impact on HVAC Energy Use: 3 PDH

How airtight are the buildings you are responsible for? What is the energy load and indoor air quality like in your buildings? The only way to know is to perform a study. Despite common assumptions, measurements have shown that typical U.S. commercial buildings are not particularly airtight.

In this course we present a recent simulation study on the impact of improving envelope airtightness in U.S. commercial buildings. You get documented, verifiable facts, report charts and graphs illustrating the findings, and a discussion from the report on the results of the study, Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Discuss the reasons for performing a study
• Understand the method of analysis regarding building envelope tightness
• Describe the buildings used for the study
• Understand which climates allow for the most HVAC savings
• Explain the results of the study

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 6 professional development hours (PDH) of continuing education.

Carbon Absorption of Volatile Organic Compounds: 3 PDH

Carbon adsorption is used in air pollution control to remove volatile organic compounds (VOCs) from low to medium concentration gas streams, when stringent outlet concentration must be met and/or recovery of the VOC is desired. This course covers the types of adsorbers, adsorption theory, and design procedures for carbon adsorption equipment.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • The types of carbon adsorption equipment and which are in most common use
  • Define an adsorption isotherm and be able to recognize the equation for the Freundlich isotherm
  • Adsorber sizing parameters
  • Make adsorption and desorption time calculations
  • Procedures for estimating carbon requirements
  • Cost estimation procedures for carbon adsorption systems

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katerina.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Describe the building and foundation types typically used in coastal areas
• Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
• Explain design and construction practices that can reduce building damage in hurricanes
• Describe construction practices that can reduce building damage in hurricanes

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Energy Performance of LEED for New Construction Buildings: 2 PDH

This focuses on the measured energy performance for 121 LEED New Construction buildings, and compares the data to a variety of benchmarks, including Commercial Building Energy Consumption Survey (CBECS) averages, Energy Star ratings and modeled energy performance estimates provided with LEED submittals.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Recognize how energy performance of the sample set of buildings was evaluated
  • Understand energy savings of LEED certified buildings
  • Discern the accuracy of energy models
  • Discern the accuracy of building specific energy models
  • Interpret the strength and weeknesses of using LEED

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Ponds- Planning, Design, Construction: 2 PDH

This course provides guidance on some of the required criteria the United States Department of Agriculture (USDA) has in place for the planning, design, construction and maintenance of ponds. This course describes basic design principles of embankment and excavation ponds as well as construction requirements. Topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance. This online PDH course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Become familiar with the general features and the differences of embankment and excavated ponds
  • How to perform a preliminary investigation
  • Be able estimate storm water runoff quantity and rate using the runoff curve number method
  • Estimate time of concentration for a watershed for a given flow length and average watershed slope
  • Advantages and disadvantages of a hooded or canopy inlet spillway and a drop inlet spillway
  • Estimate earthfill requirements for an embankment for known end areas and embankment length
  • Estimate embankment end area for known embankment height, side slopes, and top width

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Hazardous Waste Identification: 2 PDH

This course covers hazardous waste regulated by the EPA under the Resource Conservation and Recovery Act (RCRA), starting with determining whether what waste is considered a solid waste according to the RCRA regulations and moving on to determining if it fits one of the RCRA requirements for being a hazardous waste.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Fundamentals of the hazardous waste identification process
  • Definition of hazardous waste & solid waste as used by RCRA
  • How to identify listed hazardous wastes and their characteristics
  • Interpretation of the mixture and ‘derived-from’ rules
  • Interpretation of the contained-in policy

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 16 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Wastewater Treatment Plants: 1 PDH

Package plants are pre-manufactured wastewater treatment facilities typically used to treat flows between 0.01 and 0.25 MGD. This course provides information about three types of package plants, extended aeration, sequencing batch reactor and oxidation ditch systems. General configuration, typical applications for each, advantages and disadvantages, typical performance, and cost are covered.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • General configuration of extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Typical applications for extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Advantages and disadvantages of extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Design criteria for extended aeration, sequencing batch reactor, and oxidation ditch package plants
  • Typical performance and costs of extended aeration, sequencing batch reactor, and oxidation ditch package plants

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies one professional development hours (PDH) of continuing education.

Florida Laws & Rules for Professional Engineers: 1 CEH

Preview Course: Florida Laws and Rules

In this course the student will study the Florida Board of Professional Engineers Laws and Rules, including Professional Engineering Ethics. This course consists of four sections, 1) Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium, 2) Florida Statutes: Changes to Chapter 455, 3) Florida Statutes: Changes to Chapter 471, and 4) Disciplinary Cases Review.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer's guidelines for practicing within Florida's laws and rules
• Florida Rules: Rules adopted, amended, or repealed during the immediate preceding biennium
• Florida Statutes: Changes to Chapter 455
• Florida Statutes: Changes to Chapter 471
• Disciplinary Cases Review

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 11 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 1 continuing education hour (CEH).

Florida Ethics for Professional Engineers: 1 CEH

Preview Course: Florida Ethics

The primary objective of this course is to familiarize the student with the standards of professional behavior for adherence to the highest principles of ethical conduct as well as apply those principles in reviewing real case studies.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The engineer’s duty to protect the public
• The engineer’s duty to make objective and truthful statements
• The engineer’s duty to limit practice to his or her field of competence
• The engineer’s duty to maintain client confidentiality
• The engineer’s responsibility to the profession

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 continuing education hours (CEH).

2023 Florida Advanced Building Code: Building – Significant Changes: 1 CEH

This one (1) hour course covers and highlights some of the significant changes and updates in the 2023 8th Edition Florida Building Code: Building (FBC-B) which was recently updated from the 2020 FBC 7th Edition Florida Building Code: Building.

Cost Benefit of ICF: 2 PDH

This online course is based on a guide that provides cost comparisons of ICF construction to standard residential wood-frame construction, a comprehensive cost analysis of the monthly costs of home ownership for wood-frame and ICF homes, and a detailed discussion regarding many of the structural and energy performance benefits gained through the use of ICFs.

The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to earn PDH credits.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Become familiar with ICF construction
  • Be made aware of the many benefits gained through the use of ICF construction
  • Comparative performance and cost comparison of ICF home vs wood frame home
  • Structral safety and hazard mitigation
  • Energy cost comparison of ICF home

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Design of Commercial Buildings to Mitigate Terrorist Attacks: 4 PDH

This course provides guidance to engineers in methods to mitigate the effects of hazards resulting from terrorist attacks on new buildings. While focusing primarily on explosive attacks and design strategies to mitigate the effects of explosions, the course also addresses design strategies to mitigate the effects of chemical, biological and radiological attacks. In addition to the applicability to the design of new commercial office, retail, multi-family residential, and light-industrial buildings, many of the concepts presented are also applicable to other building types and/or existing buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Design strategies to enhance life safety of building occupants
• Incremental steps to produce fully developed security measures
• Multi-disciplinary approach to security design
• Complex trade-offs required when designing security into a building

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 20 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 4 professional development hours (PDH) of continuing education.

Design of Heavy Duty Concrete Floor Slabs on Grade: 3 PDH

This course describes the criteria for the design of concrete floor slabs on grade in buildings for heavy loads. Concrete floor slabs on grade are often subjected to heavy loads in buildings such as wall loads, stationary live loads and moving loads. The entire design procedure is based on a working stress concept. This course will provide the student with the criteria needed to design concrete floor slabs on grade subjected to heavy loads. Design examples are shown to aid in understanding the course material.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• The steps required to design a heavy duty concrete floor slab
• How to determine floor slab requirements for wall loads, stationary wall loads and moving loads
• How to investigate the subgrade and environmental conditions relevant to the design
• How to determine the modulus of subgrade reaction for various soils

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Hurricane Mitigation: Summary Report On Building Performance: 3 PDH

After major hurricane disasters, the Federal Emergency Management Agency (FEMA) dispatches Building Performance Assessment Teams (BPATs) to evaluate the successes and failures of buildings to withstand the wind and flood forces of these storms. The teams document the results of their evaluations in building performance assessment reports. This 3-hour online course summarizes the BPAT reports for Hurricane Katrina.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• • Describe the building and foundation types typically used in coastal areas
  • Illustrate the ability of various building and foundation types to withstand coastal surge, riverine flood, and hurricane winds
  • Explain design and construction practices that can reduce building damage in hurricanes
  • Describe construction practices that can reduce building damage in hurricanes

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 3 professional development hours (PDH) of continuing education.

Deterioration of Concrete: 2 PDH

A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be addressed in repairs. Deterioration of concrete is an extremely complex subject since, in most cases, the damage detected will be the result of more than one mechanism.

In this course, the student will review Chapter 3, Causes of Distress and Deterioration of Concrete from Engineer Manual (EM) 1110-2-2002, “Engineering and Design – Evaluation and Repair of Concrete Structures” published by the U.S. Army Corp of Engineers (issued 30 June 1995). This course is most relevant to engineers wishing to attain knowledge on the most common causes of problems in concrete. The course also provides a brief description of the basic mechanism of each common problem, a description of the typical symptoms that would be observed during a visual inspection, and suggests preventative methods or techniques to prevent further damage.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Common causes of concrete deterioration
• Symptoms of concrete distress and deterioration that can be found during visual inspections
• Preventative measures to reduce or eliminate further concrete degradation.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 10 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.

Structural Design Criteria For Structures Other Than Buildings: 2 PDH

This two hour online course establishes structural design criteria for structures other than buildings, furnishes design guidance for various types of structures, and identifies special considerations with regard to certain materials in specific applications. Structures other than buildings which are covered in this course include the following: bridges; dock and harbor facilities; drainage structures; bulk material structures; water and wastewater structures; and mechanical, electrical, and communication structures. The course materials are based entirely on the Technical Manual TM 5-809-6/AFM 88-3 of Joint Departments of the Army and Air Force USA: Structural Design Criteria for Structures Other Than Buildings.

SPECIFIC KNOWLEDGE OR SKILL OBTAINED

This course teaches the following specific knowledge and skills:

• Know the common building materials used in construction
• Types of structures used in transportation, water & electrical distribution
• Support requirements for mechanical systems and bulk materials
• Design criteria for various types of structures
• Identify special considerations with regard to certain materials in specific applications.

CERTIFICATE OF COMPLETION

You will be able to immediately print a certificate of completion after passing a 15 question multiple-choice quiz. The quiz can be retaken unlimited times until a passing grade of 70% or better is earned. This course satisfies 2 professional development hours (PDH) of continuing education.